description input/output connectors / cable assemblies the eyemax ? 4x cable assembly, right-angle pcb receptacle, and plug kit offering from fci enables high-speed, serial copper links for industry-stan- dard applications. this copper solution offers a low cost alternative to fiber optics for linking servers, storage and other data networking or communication devices. the eyemax ? link solution is designed to provide a continuous flow of serial data and eliminate data traffic congestion, which can occur among hardware devices that use a parallel bus structure. fcis eyemax ? cable assembly technology enables high-speed data transfers that deliver aggregate bandwidth capability from a single cable assembly that ranges from 10 gb/s to 20 gb/s depending on the data transfer rate and the r equir ed cable length. in addition, the eyemax ? cable technology offers <4% cross-talk performance, greater bandwidth, and exceptional overall electrical performance to support switched fabric link capabilities and scalability within and between system har dwar e applications. the mating interface used in eyemax ? cable and connector products has been selected as the exter nal i/o copper link for the following industry standards: infiniband ? , 10g fibre channel, 10g base-cx4 ethernet, and sff-8470 for serial ata (sata) or serial-attached scsi (sas). features & benefits robust pull-to-release latching or thumbscrew cable-lock hardware 4x version pr ovides 8 differential pairs high-speed data rates: ? infiniband sdr: 2.5 gb/s per channel ? infiniband ddr: 5.0 gb/s per channel ? ethernet cx4: 3.125 gb/s per channel custom paddle-card design for improved crosstalk performance impedance-controlled paddle card with capability to upgrade for equalization die-cast shells for enhanced emi shielding performance cable assembly offering available with various high-speed raw cable options right-angle, surface-mount pcb receptacles offer variety of locating post and panel-mount options rohs compliant target markets / applications data ? servers ? server clusters ? storage systems ? hpc and data centers communications ? switches ? routers industry standar ds ? infiniband (sdr, ddr) ? 10g fibre channel ? 10g base-cx4 ether net (ieee 802.3ak) ? sff-8470 for sa t a or sas eyemax ? 4x high-speed serial i/o links for infiniband ? , 10g fibre channel, 10g base-cx4 ethernet (ieee 802.3ak), and sff-8470 multilane sata/sas
features & benefits die-cast shells for enhanced emi shielding performance b lind-mate keying features standardized custom paddle-card design for improved crosstalk performance s tandardized 24 to 30 awg cable offering eight fully-shielded, differential pairs impedance-controlled paddle card with capability to upgrade for passive equalization cable assembly offering available with various high-speed raw cable sources competitively-priced product rohs compliant eyemax ? cable assemblies eyemax ? 4x high-speed serial i/o links additional information can be found at www.fci.com/eyemax or www.fci.com/cableassembly part numbers cap ability matrix for unequalized cable assemblies description base part number 4x eyemax cable assembly, latching version 10007290 4x eyemax cable assembly, thumbscrew version 10018960 www.fci.com wir e size (awg) for indicated cable length (in meters) industry standard 1m 2m 3m 4m 5m 6m 7m 8m 9m 10m 11m 12m 13m infiniband-sdr 30 30 30 28 26 24 awg awg awg awg awg awg infiniband-ddr 30 28 24 awg awg awg 10g base-cx4 ethernet 30 30 30 30 30 30 30 28 28 26 26 24 24 (ieee 802.3ak) awg awg awg awg awg awg awg awg awg awg awg awg awg
eyemax ? 4x high-speed serial i/o links fea tures & benefits shielded structur e for low cr oss-talk option for thr eaded hex standoffs to accept m2.5 thumbscrews on cable connectors clip or scr ew options for attaching latch-type pcb connectors to panels or brackets right-angle, surface-mount connectors ar e compatible with conventional reflow soldering processes locating pegs optional for manual or automated placement soldered posts secure connector to pcb eyemax ? 4x board-mount receptacles part numbers description pcb thickness part numbers 4x, latching version with mounting ears, without alignment pegs 1.6 mm 58369-111010lf 4x, latching version with mounting ears, with alignment pegs 2.4 mm 58369-112110lf 4x, latching version without mounting ears, without alignment pegs 1.6 mm 58368-111010lf 4x, latching version without mounting ears, with alignment pegs 2.4 mm 58368-112110lf 4x, thumbscrew version, without alignment pegs, with foam emi gasket 2.4 mm 10009629-102010lf 4x, thumbscrew version, without alignment pegs, without foam emi gasket 1.6 mm 10009629-111010lf 4x, thumbscr ew version, without alignment pegs, without foam emi gasket 2.4 mm 10009629-112010lf 4x, thumbscrew version, with alignment pegs, without foam emi gasket 2.4 mm 10009629-112110lf 4x, thumbscr ew version, with alignment pegs, without foam emi gasket 4.0 mm 10009629-113110lf www.fci.com latching versions without mounting ears require a panel clip to attach the connector to a panel or pci bracket. the panel clip part number is dependent upon the panel thickness and is sold separately . refer ence the connector drawing for part numbers. additional information can be found at www.fci.com/eyemax features & benefits shielded structure for low cross-talk m2.5 thumbscrew option for robust attachment to threaded h ex standoffs robust active-latch option for easy connect and disconnect die-cast shells for enhanced emi shieldingk its available with or without attached optimized paddle card kits come with 3 cable exit collar sizes for various cable diameters no crimp tooling required for cable exit eyemax ? 4x cable plug kits part numbers description with p1paddlecard with p2 paddlecard 4x plug kit - latching version, 8 signal pairs 58441-001LF 58441-101lf 4x plug kit - latching version, 8 signal pairs, passive equalization 58441-004lf 58441-104lf 4x plug kit - thumbscrew version, 8 signal pairs 10013923-001lf 10013923-101lf 4x plug kit - thumbscrew version, 8 signal pairs, passive equalization 10013923-004lf 10013923-104lf for ease of wire management, a p1 paddlecard is recommended on one end of a cable and a p2 paddlecard in the other end.
www .fci.com eyemax ? 4x high-speed serial i/o links temperature range: -10 to 60? thermal shock: 10 cycles, -55 to 85 temperature life: 456 hours @ 90 materials environmental durability: 250 cycles insertion force: ? 30n (6.6 lbs.) max. withdrawal force: ? 15n (3.3 lbs.) min. retention force: 75n (16.9 lbs.) min. minimum bend: 4 inch or less at 90 bend mechanical performance industry ? infiniband (sdr, ddr) ? 10g fibre channel ? 10g base-cx4 ethernet (ieee 802.3ak) ? sff-8470 for sata or sas fci ? gs-12-216 eyemax cable assembly product specification ? gs-12-209 eyemax connector product specification ? gs-20-025 eyemax receptacle application specification specifications ul and csa approved or approvals pending approv als and certifications cable connector and accessories ? contacts: copper alloy ? contact finish: ? mating area: au over ni ? solder area: sn over ni ? connector housing: high-temperature thermoplastic, ul94v-0 ? backshells: die-cast zinc, plated ni over cu ? strain relief: thermoplastic ? latches, thumbscrews & screws: stainless steel ? pull tab and cable collar: thermoplastic ? paddlecard: fr4 cable: fully-shielded, 8 differential pairs boar d-mount r eceptacles ? contacts: copper alloy ? contact finish: ? mating ar ea: au over ni ? solder area: sn over ni ? connector housing: high-temperatur e thermoplastic, ul94v -0 ? shell: cold rolled steel, ni plated ? latch plate: cold r olled steel, plated sn over ni ? panel clip: stainless steel ? threaded inserts: brass, ni plated ? thr eaded hex standof f: stainless steel electrical performance differential impedance: 100 10 @ 100psec insertion loss: 10.0 db max @ 1.25ghz pair -to-pair skew: 50 psec max./meter near-end crosstalk: <4% at 100psec emi ef fectiveness: 40 db min. jitter: 0.25 unit intervals (100 psec) eye pattern opening: 300 psec width min. 316 mv height min. @ 2.5gbps additional information can be found at www.fci.com/eyemax or www.fci.com/cableassembly e l x e y e m a x 0 6 0 8 e l t p r i n t e d o n r e c y c l a b l e p a p e r technical information fci - americas : 1 (800) 237 2374 - europe : 33 1 39 49 21 83 - asia/pacific : 65 6549 6666
|
